Name: Portable Doppler Ultrasonic Open Channel Flow Meter
Brand: LANRY
SKU: DOF6000-P

Home Products Ultrasonic Open Channel Flow Meter

Portable Doppler Ultrasonic Open Channel Flow Meter

Product Details:

Place of Origin:	China
Brand Name:	LANRY
Certification:	CE
Model Number:	DOF6000-P

Payment & Shipping Terms:

Minimum Order Quantity:	1 Unit
Price:	Negotiable
Packaging Details:	Carton package

Contact Now

Detailed Product Description

Product Name:	DOF6000-P Portable Open Channel Ultrasonic Flow Meter	Output:	Pulse,4-20mA), RS485/Modbus,Datalogger, GPRS
Degree Of Protection:	IP68	Weight:	3 KG
Data Logger:	16GB	Power Supply:	50 Hours Batterty
High Light:	open channel flow measurement devices , open channel water flow meter

DOF6000-P Portable Doppler Open Channel Flow Meter

Portable Doppler Ultrasonic Open Channel Flow Meter 0

The DOF6000 series flowmeter consists of Flow calculator and the Ultraflow QSD 6537 Sensor.

The flow calculator can calculate the cross-sectional area of partially filled pipe, open channel stream or river, for stream or river, with up to 20 coordinate points describing the river’s shape of cross section. It is suitable for various applications

Features:

Depth Range: 0 to 10m.
Rechargeable battery can work up to 50 hours.
20 coordinate points to describe cross section of the river’s shape.
One instrument can measure the velocity, depth and conductivity simultaneously.
Velocity Range : 0.02mm/s to 12m/s bi-directional, accuracy is 1%.
Measure velocity in both forward flow and back flow.
Depth is measured by both the pressure sensor and ultrasonic level sensor principles.
With borometric and pressure compensation function.
RS485/MODBUS output, connect to computer directly.

Specification: Calculation

Type:	Portable
Power supply:	Calculator:85-265VAC (Charging battery)
IP class:	Calculator: IP66
Operating temperature:	0℃ ~+60℃
Case material:	Fiber Glass
Display:	4.5” color LCD
Output:	Pulse,4-20mA(Flow & Depth),RS485/Modbus, Datalogger, GPRS
Size:	270L×215W×175H (mm)
Weight:	2.4 kg
Data storage:	16GB
Application:	Partially Filled Pipe: 150-6000mm; Channel: width >200mm

Specification: Sensor

Velocity:	Velocity range:	20mm/sec to 12 m/sec. Bidirectional velocity capability.
	Velocity accuracy:	±1% measured velocity
	Velocity resolution:	1mm/s
Depth (Ultrasonic):	Range:	20mm to 5000mm (5m)
	Accuracy:	± 1% of measured
	Resolution:	1 mm
Depth (Pressure):	Range:	0mm to 10000mm (10m)
	Accuracy:	± 1% of measured
	Resolution:	1 mm
Temperature:	Range:	0°C to 60°C
	Accuracy:	±0.5°C
	Resolution:	0.1°C
Electrical Conductivity (EC):	Range:	0 to 200,000 µS/cm, Typically ± 1% of measurement
	Resolution:	±1 µS/cm
	recorded as a 16-bit value (0 to 65,535 µS/cm) or a 32-bit value (0 to 262,143 µS/cm)
Tilt (accelerometer):	Range:	±70° in roll and pitch axes.
Tilt (accelerometer):	Accuracy:	±1° for angles less than 45°
Output:	SDI-12:	SDI-12 v1.3, Max. cable 50m
Output:	RS485:	Modbus RTU, Max. cable 500m
Environmental:	Operating temperature:	0℃ ~+60℃ water temperature
	Storage temperature:	-20℃ ~+60℃
	IP class:	IP68
Others:	Cable:	The standard cable is 15m, the maximum option is 500m.
	Sensor material:	Epoxy-sealed body, Marine Grade 316 Stainless Steel Mounting Bracket
	Sensor size:	135mm x 50mm x 20mm (L x W x H)
	Sensor weight:	1kg with 15m of cable

Instrument maintenance

The Ultraflow QSD requires very little maintenance. During routine site visits the following checks can be performed:

Piezo element faces	Clean the instrument surfaces where the Piezo elements are located by wiping with a cloth. If needed a plastic scraper can be used to remove any bio-fouling. Take care not to scrape the surface of the instrument. Refer to the above diagram for the areas where the ultrasonic eyes and conductivity sensors reside. These areas must be kept clean. The front face of the instrument and the area above the depth Piezo should be clear.
Pressure depth sensor	Check that the opening to the depth pressure sensor is clear of any fouling. Use a brush to clear any material.
Conductivity Electrodes	With a cloth wipe the electrode faces. Do not use abrasive materials to clean them as this will affect the calibration of the conductivity measurement.
Cable	Inspect the cable to ensure that it has not been damaged.
General inspection	Visually check the instrument to see that it has not been damaged by heavy debris in the measured stream.

Packing & Delivery

Packing

With years of export experience along with excellent quality, advanced services and competitive prices, Lanry has won numerous customers' trust and support.With years of export experience along with excellent quality, advanced services and competitive prices, Lanry has won numerous customers' trust and support.